Quick-open lift reactor is a kind of experimental equipment widely used in chemical synthesis, drug preparation, material science and other fields, and its operation skills are crucial to ensure experimental safety and improve experimental efficiency.

1. Pre-operation check: Before each operation, be sure to carefully check whether all parts of the equipment are intact, especially the performance of the sealing system to ensure that there is no leakage. At the same time, check whether all the connecting parts are fastened and whether the valve is in the correct switching state.
　　2. Correct installation and sealing: the kettle body and kettle cover are usually sealed with stainless steel winding gaskets, and the main nut should be tightened diagonally and symmetrically several times by gradually applying force to ensure a good sealing effect. Be careful not to exert too much force or unevenly, so as not to tilt the kettle cover or damage the seals.
　　3. Safe operation of quick-opening lifting kettle: It is strictly prohibited to operate under pressure, i.e., the kettle cover shall not be opened forcibly or other dangerous operations shall not be carried out when there is pressure in the kettle. In the operation process, it should pay attention to the change of pressure in kettle at any time and take corresponding safety measures.
　　4. Fast loading and unloading: Using the fast-opening feature for rapid loading and unloading can significantly improve the working efficiency. When loading, make sure the material meets the experimental requirements, no impurity and moisture; when unloading, pay attention to avoid the material splash or residue.
　　5. Control the mixing speed and temperature: according to the experimental needs, reasonably adjust the mixing speed and temperature. Too high stirring speed may lead to material splashing or stirrer damage; while too low temperature may affect the chemical reaction.
　　6. Regular maintenance and cleaning: after each use, the kettle body and sealing surface should be cleaned in time to remove the residue and keep the equipment clean. At the same time, regular inspection and maintenance of the equipment to ensure that it is in good working condition.
　　7. Quick-open lift kettle to comply with the operating procedures: strictly in accordance with the operating procedures of the equipment, shall not change or omit any steps. For unfamiliar operating procedures or parameter settings, you should consult a professional or consult the relevant literature.
　　8. Emergency treatment: In the process of operation, in case of emergencies (e.g. leakage, fire, etc.), the operation should be stopped immediately and corresponding emergency measures should be taken. At the same time, report the situation to the superior and relevant departments in time.