00617
| No. | Parameters | Tank | Limpet coil jacket | |
| 1 | Full volume（L） | 14500 | ||
| 2 | Work volume（L） | / | ||
| 3 | Design pressure（MPa） | 0.5 | 0.7 | |
| 4 | Work pressure（MPa） | 0.3 | 0.6 | |
| 5 | Design temperature（℃） | 200 | 200 | |
| 6 | Work temperature（℃） | 85 | 85 | |
| 7 | Material | S32168 | SS304 | |
| 8 | Stirring speed（r/min） | 0~90 | ||
| 9 | Motor power（KW） | 45 BT4 | ||
 |
Stirrer mechanism & Tank cover -Dual-encl-face mechanical seal -Liquid/Gas phase materials feeding ports
-Manhole with sight glass
-Tank inner temp measuring ports etc.
-Pressure gauge/safety valve port
-Inner coil inlet/outlet port
-Limpet coil jacket inlet/outlet port
Note: all nozzle ports & fitting type can be customized
|
| Outer half-tube Limpet coil jacket -Increase the capacity of the tank body -Improve heat transfer efficiency
-Save energy consumption
-Save production cost
|
 |
 |
Manhole -The manhole of this reactor is customized desgined with a sight glass in the middle of it. It will help customer to observe the working status inside the Tank. -The manhole is sealed with standard flange, which is made as per the pressure requirement of the Tank.
|
| Mechanical Seal Industrial Reactor Technical Parameters | |||||||
| Working Volume (L) | 1000 | 2000 | 3000 | 5000 | 8000 | 10000 | 20000 |
| Structure Type |
Close type (with man hole)
|
||||||
| Working pressure | ATM-1.6 MPa | ||||||
| Working temperature | 10~200 ℃ | ||||||
| Motor power (W) | 5.5 KW | 11 KW | 15 KW | 22 KW | / | ||
| Heating power (KW) | 48 KW | 60 KW | 75 KW | 90 KW | / | ||
| Heating type | Far infrared electric heating, electric heater with thermal oil bath, jacket circulation with thermal oil/steam/melt salt |
Jacket circulation with thermal oil/steam/melt salt |
|||||
| Discharging type | Discharging from bottom, or sampling from kettle lid | ||||||
| Mixing Shaft | Self-lubricating wear-resistant sleeve made of stainless steel, suitable for mixing various medium under high speed. | ||||||
| Mixing Style | Impeller, paddle, anchor, turbine, self-suction style, or as per customer's request. | ||||||
| Seal type | Mechanical Seal | ||||||
| Motor | Ordinary AC motor, or Explosion-Proof motor as per customer request. | ||||||
| Reactor material | Contacting material mainly use Cladding Plate of Stainless Steel SS304+Mild Steel Q345R, SS316L+Q345R, SS321+Q345R, or use pure stainless steel; Or use Titanium, Nickel, Zirconium, Hastelloy, Inconel or Monel Cladding Plate, or coating with Teflon PTFE or PPL as per customer request. | ||||||
| Kettle lid open port |
Gas port, Liquid port, Thermowell port, Solid feeding port, Pressure gauge, Burst disc (safety valve) port, Man hole (Hand hole), Cooling water inlet/outlet port
(or Visual Glass Port and other port according to working pressure)
|
||||||
| Controller Device |
Equipped with automatic PID or PLC controller, temperature control accuracy ±1℃;
Can display & control Mixing Speed and Heating Temperature; Can adjust heating power for constant temperature, also has self-adjustment function. |
||||||
| Other Accessories |
If the user have other special requirements on kettle cover, kettle body openning, internal structure, high and low pressure, stirring paddle and other supporting device (such as refluxing unit, condenser, constant feeding tank, collector, etc) we can
manufacture ODM reactors according to users' requests. |
||||||
